Analog Devices, L, سنسور دما

LTC2995 سنسور دما

LTC2995 سنسور دما خروجی  آنالوگ حساسیت   4mV/°K

The LTC®2995 is a high accuracy temperature sensor
and dual supply monitor. It converts the temperature of an external diode sensor and/or its own die temperature to an analog output voltage while rejecting errors due to noise and series resistance. Two supply voltages and the measured temperature are compared against upper and lower limits set with resistive dividers. If a threshold is exceeded, the device communicates an alert by pulling low the correspondent open drain logic output.
The LTC2995 gives ±1°C accurate temperature results using commonly available NPN or PNP transistors or temperature diodes built into modern digital devices. Volt- ages are monitored with 1.5% accuracy. A 1.8V reference output simplifies threshold programming and can be used as an ADC reference input.
The LTC2995 provides an accurate, low power solution for temperature and voltage monitoring in a compact 3mm × 3mm QFN package.






بازگشت به لیست

دیدگاهتان را بنویسید

نشانی ایمیل شما منتشر نخواهد شد. بخش‌های موردنیاز علامت‌گذاری شده‌اند *